Pioneer A-006

Made In Japan, 1979-1981

audio-database.com/PIONEER-EXCLUSIVE/amp/a-006-e.html

Type Stereo pre-main amplifier
Power Amplifier Unit
Effective output (both channel drive, 8 Ω) 70W + 70W (5 Hz ~ 30 kHz, THD 0.01%)
70W + 70W (5 Hz ~ 70 kHz, THD 0.05%)
Harmonic distortion factor 0.01% (Effective Output, 5 Hz to 30 kHz, 8 Ω)
Intermodulation distortion factor (50 hz : 7 khz = 4 : 1) 0.01% (8 Ω at effective output)
Output Bandwidth (IHF, double-channel drive, 8 ω) 5 Hz ~ 50 kHz (THD 0.01%)
5 Hz ~ 100 kHz (THD 0.05%)
Frequency response (at 1W output) 5 Hz ~ 200 kHz + 0 -1dB
Damping factor 40 (5 Hz ~ 30 kHz, 8 Ω)
Signal-to-noise ratio 115 dB (IHF, A-network, short circuit)
Preamplifier Section
Input Sensitivity / Impedance Phono1, 2 (MM) : 2.5mV/100 Ω, 10k Ω, 25k Ω, 50k Ω, 100k Ω
Phono1, 2 (MC) : 250 μ V/100 Ω
Tuner, Aux, Tape play1, 2 : 150mV/50k Ω
Cartridge load capacity Phono1, 2 (MM) : 100 pF, 200 pF, 300 pF, 400 pF, 500 pF
Phono maximum allowable input
(1 kHz, 0.01% THD) MM:300mV
MC:30mV
Harmonic distortion factor (5 Hz to 30 kHz) 0.005% (1 V Output)
0.01% (10 V Output)
Frequency characteristic Phono : 20 Hz to 20 kHz ± 0.2 dB
Tuner, Aux, and Tape play : 5 hz to 100 khz + 0 to 1 db
Signal-to-noise ratio (IHF, A-network
Short circuit) Phono MM:90dB
Phono MC:73dB
Tuner, Aux, Tape play : 105 dB
Subsonic filter 15 Hz, 6dB/oct., 12dB/oct.
AC outlet Power switch interlock : 2 systems
Power switch not linked : 2 systems
Power supply voltage 100 VAC, 50Hz/60Hz
Power consumption 190W (Electrical Appliance and Material Control Law)
500W maximum
External dimensions Width 420x Height 155x Depth 378 mm
Weight 14.6.k